PP Biaxial Geogrid Composite BXC30-150

Applications 

■ Base reinforcement 

■ Subgrade reinforcement 

■ Slope reinforcement 

■ Embankment stabilization

Inquiry
Contact Us

Introduction

LIANYI PP Biaxial Geogrid Composite Geotextile BXC30-150 is traditional polypropylene extruded biaxial geogrid thermally bonded with a needle punched nonwoven geotextile. This Biaxial Geogrid Composite is perfect for reinforcement, road construction and other uses in civil engineering where reinforcement and separation are required. The Geogrid composite nature makes it very easy and fast to install when compared to traditional Geogrid separation product cross-sections. This Biaxial Geogrid Composite material is very effective in maintaining the separation of imported granular fill from the fines contained in typical saturated base soils. 

Specification

Geogrid:



Index PropertiesTest methodUnitsMD ValuesTD Values
■  Polymer--PP-
■  Minimum Carbon blackASTM D 4218%2-
■  Tensile strength @ 2% strainASTM D 6637kN/m (lb/ft)10.5 (720)10.5 (720)
■  Tensile strength @ 5% strainASTM D 6637kN/m (lb/ft)21 (1.440)21 (1.440)
■  Ultimate tensile strengthASTM D 6637kN/m (lb/ft)30 (2,050)30 (2,050)
■  Stain @ Ultimate strengthASTM D 6637%1313





Structural Integrity



■  Junction EfficiencyGRI GG2%9595
■  Flexural RigidityASTM D 7748mg-cm2,000,000-
■  Aperture StabilityCOE Methodm-N/deg0.75-
Geotextile



■  Polymer

PET long-fiber
■  Mass Per Unit AreaASTM D5261g/m2150
■  Tensile StrengthASTM D5035kN/m1111
■  Elongation at PeakASTM D5035%5050
■  CBR bursting strengthASTM D6241N15001500
Roll Dimensions



■  Aperture Dimensions-mm (in)34 (1.3)35 (1.4)
■  Minimum Rib ThicknessASTM D 1777mm (in)2.3 (0.09)1.7 (0.07)
■  Roll Width-m (ft)3.95 (12.9)-
■  Roll Length-m (ft)50 (164)-

Get a Free Quote

Submit